Selecting a System
Steps
1
Step One
Select a system that will give you visual confirmation that the remote start is engaged. This can be achieved by flashing the headlights, parking lights or 2 way pager remote. Pager remotes can also give you important info like temperature in car or remaining run time.
2
Step Two
Make certain that the system includes a pin switch on the hood of the vehicle. The switch will sense when the hood is open and prevent the remote start from starting the car. This protects you or a mechanic who may be working on the car.
3
Step Three
Make certain that the system can incorporate the foot brake so that the remote start system cuts off when the brake is tapped.
4
Step Four
Make certain that the system can monitor the transmission to assure that it is in park when the remote start system is engaged. If the transmission is out of park, this monitoring feature will prevent the system from starting the car.
5
Step Five
Make certain that there is a relay added to the starter of the car so that the starter will not grind if you engage it while the engine is already on. Remember, you will have to turn the ignition switch on with the key when you enter the car after you have remotely started it. The antigrind feature protects the car's starter from damage if you accidentally engage the starter while turning on the ignition switch.
6
Step Six
Make certain that the system includes a temperature sensor or an oil-pressure circuit to sense whether the engine is overheating. It should be able to shut off the engine if it is too hot.
7
Step Seven
Select a system that allows you to program what button or buttons you use to engage the remote start. If you have children and they like to play with your remote transmitter, this feature can prevent them from accidentally starting the car. The installer can simply program the remote so that two buttons need to be pressed simultaneously to engage the remote start.
8
Step Eight
Choose a system that's made by a reputable manufacturer that has been in the business, supports their product and has a network of authorized installation shops across the country.
9
Step Nine
Select a system that will turn the engine on if the ambient temperature drops below a certain level if you live in a very, very cold climate.
10
Step Ten
Select a system that has a range of at least 400 feet, if you live in the city and you can park your car in front of your house or in your driveway look for something with extended range (1500' to one mile)
11
Step Eleven
Select a system that can bypass the original equipment manufacturer's (OEM) immobilizer systems if your car is equipped with one. The OEM system requires a key with a microchip imbedded in it to start the car. Some manufacturers have created ways to bypass this when engaging their remote start product.
Select a Shop to Install the System
Steps
1
Step One
Ask the salesperson how long his or her shop has been installing remote start systems in your type of car, and if they are an authorized dealer for that brand.
2
Step Two
Find out whether the installer has been certified by the Mobile Electronics Certification Program.
3
Step Three
Make sure you buy your remote start from the shop doing the installation, sure you might save a few dollars getting the remote start from eBay or some other internet site, but it's the service that will save you headaches and money in the long run.
4
Step Four
Ask to see photos of their installations of remote start products. Ask the salesperson to point out features of the photographed installations that show the quality of work that the shop performs.Ask them what they have installed in their car.
5
Step Five
Get the installer to thoroughly go through the installation with you to make sure that everything was done properly.
6
Step Six
Read the owner's manual to see what features are supposed to be on the system, and then test the system and its safety features to be certain everything has been connected and works properly
